TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Mga pagtutukoy

• modelo: Q103
• Pagkakatugma: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Pagkakakonekta: Bluetooth, 2.4G Wireless, USB (Type-C)
• Nagtatrabaho Voltage: DC 3.7V
• Kasalukuyang gumagana: < 30mA
• Tulog Kasalukuyan: < 5uA
• Nagcha-charge Voltage/Kasalukuyan: DC 5V/500mA

Pag-troubleshoot

• Hindi nakakonekta ang controller:
  • Tiyaking ganap na naka-charge ang controller.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Tiyaking naka-enable ang Bluetooth sa iyong device.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Mga pindutan na hindi tumutugon:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Test the controller in a different game or application.
• Input lag:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Bawasan ang interference mula sa iba pang mga wireless device.
  • Try connecting via USB cable if available.
• Hindi nagcha-charge ang controller:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Subukan ang ibang Type-C cable o power adapter.
  • The LED indicator should show the charging status.

Q103 Functional na diagram

1. Pindutan ng D-pad
2. X/Y/A/B na Button
3. HOME Reconnect/Power Button
4. Pindutan ng PAIR
5. Pindutan ng PUMILI
6. TURBO Button
7. Kaliwang Button ng Joystick/L3
8. Kanang Joystick/R3 Button
9. Malinaw na Button
10. Button ng START
11. L na Pindutan
12. L2 Button
13. Type-C Charging Port
14. Pindutan ng R2
15. Pindutan ng R
16. I-reset ang butas
17. LED
18. Paglipat ng Mode

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 at mas mataas

Koneksyon sa Bluetooth

1. I-flip ang switch: Lumipat sa X upang makapasok sa X- INPUT mode.
2. Unang paggamit (Power-on na pagpapares):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • Palaging pula ang LED kapag matagumpay ang muling pagkonekta.
3. Gamitin muli (Reconnection):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. Palaging pula ang LED kapag matagumpay ang muling pagkonekta.
4. Press the PAIR button to power off the device.

SWITCH Mode

Koneksyon sa Bluetooth

1. I-flip ang switch: Lumipat sa S para makapasok sa Switch mode.
2. Unang paggamit (Power-on na pagpapares):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   Ang LED ay laging berde kapag matagumpay ang muling pagkonekta.
3. Gamitin muli (Reconnection):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus para sa Android

Android 9.0 at mas mataas

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Unang paggamit (Power-on na pagpapares):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Gamitin muli (Reconnection):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Pindutin ang Pair button para patayin ang device.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Pag-upgrade ng firmware

1. Ikonekta ang V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Mga setting ng joystick

• Pag-calibrate ng rocker
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Mga parameter ng elektrikal

• Nagtatrabaho voltage: DC3.7V
• Kasalukuyang nagtatrabaho: <30mA
• Kasalukuyang natutulog: <5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Oras ng standby: 30 araw (ganap na naka-charge)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Sleep / Wake-up function:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

Babala ng FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• I-reorient o i-relocate ang receiving antenna.
• Palakihin ang paghihiwalay sa pagitan ng kagamitan at receiver.
• Ikonekta ang kagamitan sa isang saksakan sa isang circuit na iba sa kung saan nakakonekta ang receiver.
• Kumonsulta sa dealer o isang may karanasang radio/TV technician para sa tulong.

Pag-iingat: Ang anumang mga pagbabago o pagbabago sa device na ito na hindi hayagang inaprubahan ng manufacturer ay maaaring magpawalang-bisa sa iyong awtoridad na patakbuhin ang kagamitang ito.
Sumusunod ang device na ito sa bahagi 15 ng Mga Panuntunan ng FCC. Ang operasyon ay napapailalim sa sumusunod na dalawang kundisyon:

1. Ang device na ito ay maaaring hindi magdulot ng mapaminsalang interference, at
2. Dapat tanggapin ng device na ito ang anumang interference na natanggap, kabilang ang interference na maaaring magdulot ng hindi gustong operasyon.

Sumusunod ang kagamitang ito sa mga limitasyon sa pagkakalantad ng radiation ng FCC na itinakda para sa isang hindi nakokontrol na kapaligiran. Ang kagamitang ito ay dapat na naka-install at pinaandar na may pinakamababang distansya na 0cm sa pagitan ng radiator at ng iyong katawan.