LED Controller
(Multi-Zone)

M1C Wireless Controller

The Mini Pro Series LED Remote Control adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (in an unobstructed environment).
When paired with the P5 Controller, one controller is compatible with 5-channel output and supports five types of lamps: DIM, CT, RGB, RGBW, and RGBCW. Within the effective control range, one remote control can control an unlimited number of controllers,  and realize functions such as light on/off, brightness adjustment, color temperature tuning, RGB static color selection, dynamic mode effects activation, and scene recall—meeting users’ needs for different lighting applications.
For zone control: One remote control can manage multiple zones, and multiple controllers can be coded into the same zone to achieve group control of that zone. Pressing the master on/off key of the remote control once can turn on/off the lights in all zones.

Mga Teknikal na Parameter

Modelo	M1C	M1D	M2C	M2D	M4C	M4D	M5C	M5D
Kulay	Puti	Itim	Puti	Itim	Puti	Itim	Puti	Itim
Uri ng Dimming	DIM		CT		RGB/ RGBW		RGBCW
Uri ng wireless	RF 2.4GHz
Nagtatrabaho voltage	3Vdc (Baterya na may buton na CR2032×1)
Naka-standby na kasalukuyang	＜ 2uA
Distansya ng remote	30M (Under unobstructed conditions)
Mga Katugmang Controller	P1、P2、P3、P4、 P5		P2、P3、P4、 P5		P3、P4、 P5		P5
Temp.	-25℃~50℃
Timbang	40g±10g
Mga sukat	104×58×9mm (remote)，108×63×14mm (remote+hold)

Mga sukat

Pag-install ng Produkto

Dalawang paraan upang ayusin ang remote holder:

1. Ayusin ang remote holder sa dingding gamit ang dalawang turnilyo.
2. Ayusin ang remote holder sa dingding gamit ang 3M adhesive.

Kapalit na baterya

Mga Pag-andar ng Pindutan

Dimming Remote Control M1C/M1D

Zone 1,2,3,4:
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).

Master Power: Turns all lights on or off.
Zone 1, 2, 3, 4: Short press to turn on and select the current zone’s light; long press to turn off the current zone’s light.
Brightness Touch Ring: Touch to change the brightness of the current zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Color Temperature Remote Control M2C/M2D

Zone 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Brightness Touch Ring: Touch to change the color temperature of the current Zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 consecutive levels.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Mga Pag-andar ng Pindutan
RGB/RGBW Remote Control M4C/M4D

Zone 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
White Light: For RGBW lights, short press to turn the W channel on or off; long press for 1-6 seconds to continuously adjust the W brightness.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5C/M5D

Zone 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the color temperature/RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Color Temperature: Short press to turn the current Zone’s color temperature channel on/off; touch the color ring to switch to the color temperature touch ring; Long press to adjust the brightness of the current color temperature.
RGB: Short press to turn the current Zone’s RGB channel on/off; touch the color ring to switch to the RGB touch ring;
Long press to adjust the brightness of the current color.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

Kulay	R/G/B values
Pula	R100%   G0%   B0%
Dilaw	R100%   G100%   B0%
Berde	R0%   G100%   B0%
Cyan	R0%   G100%   B100%
Asul	R0%   G0%   B100%
Lila	R100%   G0%   B100%
Puti	R100%   G100%   B100%

Dynamic na mode	Red-purple gradient	Static mode	Pula
	Blue-purple gradient
	Color temperature gradient (warm yellow, cool white)		Berde
	Three-color gradient (RGB)
	Six-color gradient (red, green, blue, yellow, purple, cyan)		Asul
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		Dilaw
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)		Lila
	Three-color gradient (RGB)		Cyan
	White gradually brightens and darkens		Mixed light white

Wiring Diagram

Used with P-series controllers

Pagpapares ng Code
Key pairing code

1. Short press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Tandaan: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Malinaw na Code
To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together
Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning.
   *Remote controls of the same model can learn from each other.

Malinaw na Code
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Katayuan ng Ilaw ng Tagapagpahiwatig

• Kapag naka-on ang ilaw, pindutin ang anumang buton, at ang indicator light ng remote control ay magiging pula.
• Kung walang button na pinindot sa loob ng 6 segundo, papasok ang remote control sa sleep mode. Para lumabas sa sleep mode, pindutin ang anumang button.

Tandaan: Kung hindi bumubukas ang LED light kapag pinindot ang buton, maaaring patay na ang baterya. Pakipalitan agad ang baterya.

Transportasyon at Imbakan

1. Transportasyon
   Maaaring ipadala ang mga produkto sa pamamagitan ng mga sasakyan, bangka at eroplano.
   Sa panahon ng transportasyon, ang mga produkto ay dapat na protektado mula sa ulan at araw. Mangyaring iwasan ang matinding pagkabigla at panginginig ng boses sa panahon ng proseso ng paglo-load at pagbabawas.
2. Imbakan
   Ang mga kundisyon ng imbakan ay dapat sumunod sa Class I Environmental Standards. Ang mga produkto na nakaimbak nang higit sa anim na buwan ay inirerekomenda na muling suriin at magagamit lamang pagkatapos na maging kwalipikado ang mga ito.

Mga atensyon

• Mangyaring gamitin sa isang tuyo na panloob na kapaligiran;
• Kapag nag-i-install ng baterya, mangyaring ikonekta nang tama ang positibo at negatibong terminal. Kung ang remote ay hindi gagamitin sa mahabang panahon, alisin ang baterya;
• Kapag ang remote na distansya ay umikli at o ang remote ay hindi gumagana nang madalas, mangyaring baguhin ang baterya sa oras;
• Mangyaring maingat na dalhin ito at ilagay ito upang maiwasan ang pagkahulog na nagdudulot ng pinsala;
• Kung may naganap na pagkakamali, mangyaring huwag subukang ayusin ang mga produkto nang mag-isa. Kung mayroon kang anumang tanong, mangyaring makipag-ugnayan sa iyong mga supplier.
  ※ This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.

Kasunduan sa Warranty

• Mga panahon ng warranty mula sa petsa ng paghahatid: 5 taon.
• Ang mga libreng serbisyo sa pagkukumpuni o pagpapalit para sa mga problema sa kalidad ay ibinibigay sa loob ng mga panahon ng warranty.

Mga pagbubukod ng warranty sa ibaba:

Ang mga sumusunod na kundisyon ay wala sa saklaw ng garantiya ng mga libreng serbisyo sa pagkukumpuni o pagpapalit:

• Lampas sa mga panahon ng warranty;
• Anumang artipisyal na pinsala na dulot ng mataas na voltage, labis na karga, o hindi tamang operasyon;
• Mga produkto na may matinding pisikal na pinsala;
• Pinsala na dulot ng mga natural na sakuna at force majeure;
• Nasira ang mga label ng warranty at barcode.
• Walang kontratang pinirmahan ang aming kompanya.
  1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
  2. Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

BABALA

• HAZARD SA INGESTION: Ang produktong ito ay naglalaman ng isang button cell o baterya ng barya.
• Ang kamatayan o malubhang pinsala ay maaaring mangyari kung natutunaw.
• Ang nalunok na button cell o coin na baterya ay maaaring magdulot ng Panloob na kemikal na Burns sa loob lamang ng 2 oras.
• PANATILIHING HINDI AABOT NG MGA BATA ang mga bago at ginamit na baterya
• Humingi ng agarang medikal na atensyon kung ang isang baterya ay pinaghihinalaang nalunok o ipinasok sa loob ng anumang bahagi ng katawan.

a) Alisin at agad na i-recycle o itapon ang mga ginamit na baterya ayon sa mga lokal na regulasyon at ilayo sa mga bata. HUWAG itapon ang mga baterya sa basurahan ng bahay o sunugin.
b) Kahit na ang mga ginamit na baterya ay maaaring magdulot ng matinding pinsala o kamatayan.
c) Tumawag sa isang lokal na sentro ng pagkontrol ng lason para sa impormasyon sa paggamot.
d) The compatible battery type: CR2032.
e) Ang nominal na baterya voltage: 3Vdc.
f) Ang mga hindi rechargeable na baterya ay hindi dapat i-recharge.
g) Huwag pilitin na i-discharge, i-recharge, i-disassemble, init sa itaas (tinukoy na rating ng temperatura ng tagagawa) o sunugin. Ang paggawa nito ay maaaring magresulta sa pinsala dahil sa pagbuga, pagtagas o pagsabog na nagreresulta sa pagkasunog ng kemikal.
h) Tiyakin na ang mga baterya ay na-install nang tama ayon sa polarity (+ at -).
i) Huwag paghaluin ang mga luma at bagong baterya, iba't ibang tatak o uri ng mga baterya, tulad ng alkaline, carbon-zinc, o mga rechargeable na baterya.
j) Alisin at agad na i-recycle o itapon ang mga baterya mula sa kagamitang hindi ginagamit sa mahabang panahon ayon sa mga lokal na regulasyon.
k) Palaging ganap na i-secure ang kompartimento ng baterya. Kung ang kompartamento ng baterya ay hindi nakasara nang ligtas, itigil ang paggamit ng produkto, alisin ang mga baterya, at ilayo ang mga ito sa mga bata.

Mga Dokumento / Mga Mapagkukunan

LTECH M1C Wireless Controller [pdf] Manwal ng Pagtuturo M1C, M1D, M2C, M2D, M4C, 4D, M5C, M5D, 301, A3, M1C Wireless Controller, M1C, Wireless Controller, Controller

Mga sanggunian

• User Manual