DJI Manifold 3 High Performance Onboard Computing Power Box

Ang dokumentong ito ay naka-copyright ng DJI na ang lahat ng karapatan ay nakalaan. Maliban kung pinahintulutan ng DJI, hindi ka karapat-dapat na gamitin o payagan ang iba na gamitin ang dokumento o anumang bahagi ng dokumento sa pamamagitan ng pagkopya, paglilipat o pagbebenta ng dokumento. Sumangguni lamang sa dokumentong ito at sa nilalaman nito bilang mga tagubilin sa pagpapatakbo ng mga produkto ng DJI. Ang dokumento ay hindi dapat gamitin para sa iba pang mga layunin.
Kung sakaling magkaroon ng divergence sa iba't ibang bersyon, ang Ingles na bersyon ang mananaig.

Paghahanap ng Mga Keyword
Maghanap para sa mga keyword tulad ng "baterya" at "i-install" upang makahanap ng paksa. Kung gumagamit ka ng Adobe Acrobat Reader upang basahin ang dokumentong ito, pindutin ang Ctrl+F sa Windows o Command+F sa Mac upang magsimula ng paghahanap.

Pag-navigate sa isang Paksa
View isang kumpletong listahan ng mga paksa sa talaan ng mga nilalaman. Mag-click sa isang paksa upang mag-navigate sa seksyong iyon.

Pagpi-print ng Dokumentong ito
Sinusuportahan ng dokumentong ito ang high-resolution na pag-print.

Gamit ang Manwal na ito

Alamat

• Mahalaga
• Mga Pahiwatig at Tip
• Sanggunian

Mga Tutorial sa Video

Pumunta sa address sa ibaba o i-scan ang QR code upang panoorin ang mga video ng tutorial, na nagpapakita kung paano gamitin ang produkto nang ligtas:

https://enterprise.dji.com/manifold-3/video

I-download ang DJI Assistant 2

Download and install DJI ASSISTANT™ 2 (Enterprise Series) using the link below: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice
* Sinusuportahan lamang ang bersyon ng Windows.

Produkto Profile

Tapos naview

Port ng USB-C
It supports connecting USB 3.0 devices (such as docking stations and USB drives), but does not support connecting a computer directly.

• Use USB PD chargers to power the device via this port, such as the DJI 100W USB-C Power Adapter or DJI 65W Portable Charger.
• When the port is not in use, make sure to cover it and tighten the thumb screw.

I-reset ang Pindutan
Press and hold for 10 seconds to restore factory settings, which will erase installed applications and all data.

LED Indicator

E-Port

For connecting compatible aircraft only.

Mga pagtutukoy

Bisitahin ang mga sumusunod website para sa mga pagtutukoy.
https://enterprise.dji.com/manifold-3/specs

Pag-install

Installing on DJI Matrice 400

Listahan ng Tool (ibinenta nang hiwalay)

Pag-install
Follow the diagram for installation and connection. The device can only connect to the aircraft’s E1/E2/E3 ports. It is recommended to connect to the E3 port.

Paggamit

Pag-update ng Firmware

1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
2. Make sure the computer is connected to the internet and the DJI device is powered on.
3. Ilunsad ang DJI Assistant 2 at mag-log in gamit ang isang DJI account.
4. Select the device and click Firmware Upgrade on the left side.
5. Piliin ang bersyon ng firmware at i-click upang i-update. Ang firmware ay mada-download at awtomatikong maa-update.
6. A prompt appears when the update is successful.

• Users can also download the firmware package from the DJI official website para sa isang offline na pag-update. Ilunsad ang DJI Assistant 2 at i-click ang Offline Update. Piliin ang device at ang firmware package, pagkatapos ay i-tap ang Start Update.
• The update will take a while. Wait patiently until it finishes.

Manifold Application

Developers can create Manifold 3 application based on DJI PSDK, and users can install and use the application via DJI Pilot 2. Visit https://developer.dji.com/payload-sdk for development information and guidelines.

Bisitahin https://enterprise.dji.com/ecosystem to search for and obtain application software that meets your requirements.

I-install ang Application

1. Copy the installation package with the .dpk extension to the remote controller’s built-in storage or an external microSD card. Connect Manifold 3 to the aircraft, and power on the remote controller and aircraft. Ensure the remote controller is connected to the internet.
2. Launch DJI Pilot 2, and tap Manifold 3 > Application Management.
3. Tap the “+” in the upper right corner, and select the installation package file for installation. Successfully installed applications will be displayed on the Application Management page.

• To uninstall, enter Application Management page, then select the application and tap More > Application Uninstallation.
• To upgrade, follow the steps above to install the upgraded installation package.

Patakbuhin ang Application
Connect Manifold 3 to the aircraft. Launch DJI Pilot 2 and tap Enter Camera View sa home page.

Maaaring mag-iba ang interface depende sa naka-install na payload. Mangyaring sumangguni sa aktwal na interface.

1. After entering the camera view, tap … on the left side to view the installed applications.
2. Tap the icon of the desired application to launch it. Users can view ang mga epekto ng operasyon sa camera view.
   • Using multiple applications simultaneously is not supported. To switch to another application, tap the icon of the running application to close it first.
   • Press and hold the application icon, then drag it to the function bar to pin it in the camera view para madaling ma-access.

I-export ang Application Files

Using DJI Pilot 2

1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C port.
2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap File I-export. Ang data files will be saved to the USB drive or hard drive.

Gamit ang DJI Assistant 2

1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
2. Launch DJI Assistant 2, click Log Export > Manifold 3 > Open Directory, and select the data files i-export.

I-export ang mga Log

I-export ang Manifold 3 Log

1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
2. Ilunsad ang DJI Assistant 2 at mag-log in gamit ang isang DJI account.
3. Select the device and click Log Export on the left side.
4. Click the checkbox to select designated device logs.

I-export ang Mga Log ng Application

1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C Port.
2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap More > Log Export. The logs will be saved to the USB drive or hard drive.

When using DJI Assistant 2 to export logs, follow the steps in the Export Application Files seksyon at piliin ang log files i-export.

NANDITO KAMI PARA SAYO

Makipag-ugnayan

SUMUPERTA SI DJI

Ang nilalaman ay maaaring magbago nang walang paunang abiso.

I-download ang pinakabagong bersyon mula sa

https://enterprise.dji.com/manifold-3/downloads
Kung mayroon kang anumang mga katanungan tungkol sa dokumentong ito, makipag-ugnay sa DJI sa pamamagitan ng pagpapadala ng isang mensahe sa DocSupport@dji.com.

Ang DJI at MANIFOLD ay mga trademark ng DJI. Copyright © 2025 DJI All Rights Reserved.

Mga Dokumento / Mga Mapagkukunan

dji Manifold 3 High Performance Onboard Computing Power Box [pdf] User Manual Manifold 3 High Performance Onboard Computing Power Box, Performance Onboard Computing Power Box, Onboard Computing Power Box, Computing Power Box, Power Box

Mga sanggunian

• User Manual