DELL Command Configure Software User Manual

Mga tala, pag-iingat, at mga babala

TANDAAN: Ang TALA ay nagpapahiwatig ng mahalagang impormasyon na makakatulong sa iyong mas mahusay na gamitin ang iyong produkto.

Pag-iingat: Ang isang pag-iingat ay nagpapahiwatig ng alinman sa mga potensyal na pinsala sa hardware o pagkawala ng data at sasabihin sa iyo kung paano maiwasan ang problema.

BABALA: Ang isang BABALA ay nagpapahiwatig ng potensyal para sa pinsala sa ari-arian, personal na pinsala, o kamatayan.

© 2025 Dell Inc. o mga subsidiary nito. Lahat ng karapatan ay nakalaan. Ang Dell Technologies, Dell, at iba pang mga trademark ay mga trademark ng Dell Inc. o mga subsidiary nito. Ang ibang mga trademark ay maaaring mga trademark ng kani-kanilang mga may-ari.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

TANDAAN: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• Dell Command | I-configure ang 4.10.1 o mas bago ay bumubuo ng 64-bit na SCE na may mga hadlang.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

Mga Paksa:

• Bersyon
• Nilalayon na madla
• Layunin ng dokumento

Bersyon

Ang kabanatang ito ay nagbibigay ng taposview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Windows 11
• Windows 10
• Windows Preinstallation Environment (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

Talahanayan 1. Version matrix

TANDAAN: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

Nilalayon na madla

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

Layunin ng dokumento

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Pag-access sa Dell Command | I-configure ang installer

Ang Dell Command | I-configure ang pag-install file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. Pumunta sa Suporta | Dell.
2. Sa ilalim Aling produkto ang matutulungan ka namin, ipasok ang Serbisyo Tag ng iyong sinusuportahang Dell device at i-click Isumite, O click I-detect ang personal na computer.
3. Sa pahina ng Suporta sa Produkto para sa iyong Dell device, i-click Mga Driver at Pag-download.
4. I-click Manu-manong maghanap ng partikular na driver para sa iyo [model].
5. Suriin Sistema ng pamamahala checkbox sa ilalim Kategorya drop-down.
6. Hanapin Dell Command | I-configure in list and select I-download sa kanang bahagi ng pahina.
7. Hanapin ang na-download file sa iyong computer (sa Google Chrome, ang file lalabas sa ibaba ng window ng Chrome), at patakbuhin ang executable file.
8. Sundin ang mga tagubilin sa screen.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

Mga Paksa:

• Mga sinusuportahang operating system para sa Windows
  
• Mga sinusuportahang platform
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Mga sinusuportahang operating system para sa Windows

Talahanayan 2. Mga sinusuportahang operating system

Mga sinusuportahang platform

Table 3. Supported platforms

Table 3. Supported platforms (continued)

TANDAAN: Platforms must support WMI-ACPI BIOS for full functionality.

TANDAAN: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

TANDAAN: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

TANDAAN: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

Mga kinakailangan

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

TANDAAN:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET Framework 4.8 or later version from the I-on o i-off ang mga feature ng Windows screen.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. I-double click ang na-download na DUP, i-click ang Oo, at pagkatapos ay i-click ang I-INSTALL.
   Ang Dell Command | I-configure ang installation wizard ay ipinapakita.
2. Patakbuhin ang installation wizard.
   Para sa karagdagang impormasyon, tingnan ang Pagpapatakbo ng installation wizard.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. Patakbuhin ang sumusunod na command:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. I-double click ang na-download na Dell Update Package (DUP), at i-click ang Oo.
2. I-click ang EXTRACT.
   Ang window ng Browse For Folder ay ipinapakita.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. Upang view ang nakuha files, mag-click View Folder.
   Ang folder ay naglalaman ng mga sumusunod files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. Upang ma-access ang Dell Command | I-configure ang installation wizard, i-double click ang Command_Configure.msi.
6. Patakbuhin ang installation wizard.
   Para sa karagdagang impormasyon, tingnan ang Pagpapatakbo ng installation wizard.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

Pagpapatakbo ng wizard sa pag-install

To run the installation wizard for installing the Dell Command | Configure .msi file on your device:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   Ang installation wizard ay ipinapakita.
3.  I-click ang Susunod.
   Ang screen ng Kasunduan sa Lisensya ay ipinapakita.
4. Basahin ang kasunduan sa lisensya at i-click ang Tinatanggap ko ang mga tuntunin sa kasunduan sa lisensya, at pagkatapos ay i-click ang Susunod.
   Ang screen ng Impormasyon ng Customer ay ipinapakita.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   Ang pasadyang screen ng pag-setup ay ipinapakita.
6. I-click ang Susunod upang i-install ang Dell Command | I-configure ang CLI at GUI sa default na direktoryo. Ang default na Dell Command | I-configure ang mga direktoryo ng pag-install ay:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   Ang screen na Ready to Install the Program ay ipinapakita.
7. I-click ang Oo.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. I-click ang Tapos na.
   Kung ang Dell Command | Ang pag-configure ng GUI ay matagumpay na na-install, ang shortcut para sa GUI ay ipinapakita sa desktop.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

TANDAAN: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

TANDAAN: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Pumunta sa folder kung saan ang Dell Command | I-configure ang installer ay nakuha mula sa Dell Update Package (DUP).
2. Open Command Prompt as administrator.
3. Patakbuhin ang sumusunod na command: msiexec.exe /i Command_Configure.msi /qn
   Ang Dell Command | Ang mga bahagi ng pag-configure ay tahimik na naka-install sa mga sumusunod na lokasyon:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Pag-install gamit ang mga sinusuportahang wika

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 — Chinese Taiwan
• 1031 - Aleman
• 1033 - Ingles
• 1034 — Espanyol
• 1036 — Pranses
• 1040 — Italyano
• 1041 - Hapones
• 1043 — Dutch
• 2052 — Pinasimpleng Tsino
• 3076 — Chinese Hongkong

TANDAAN: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. Buksan ang Control Panel.
2. Pumunta sa Mga Programa > Mga Programa at Mga Tampok.
3. Find Dell Command | Configure sa listahan.
4. Right-click it and select I-uninstall.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

TANDAAN: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

TANDAAN: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

TANDAAN: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

TANDAAN: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

Gawin ang mga sumusunod na hakbang upang i-upgrade ang Dell Command | I-configure (dating Dell Client Configuration Toolkit) sa susunod na bersyon:

1. Double-click the downloaded DUP, and then click I-INSTALL.
   Ang Dell Command | I-configure ang installation wizard ay inilunsad.
2. Patakbuhin ang installation wizard, at sundin ang mga tagubilin na ipinapakita sa screen.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. I-download ang pinakabagong pag-install file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the file, at pagkatapos ay patakbuhin ang sumusunod na command:
   msiexec.exe /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=VOMUS
   TANDAAN: Ang installation wizard screen ay ipinapakita na sinusundan ng “Isang mas lumang bersyon ng Dell Command | Ang pag-configure ay nakita sa system na ito. Kung magpapatuloy ka, aalisin ng installer ang mas lumang bersyon at magpapatuloy sa pag-install ng pinakabagong bersyon. Kung kakanselahin mo ang pag-install ng pinakabagong bersyon, hindi maibabalik ang system sa nakaraang bersyon ng Dell Command | I-configure. Gusto mo bang magpatuloy?" mensahe.
3. Sundin ang mga tagubilin sa screen para mag-upgrade.
   TANDAAN: Para sa isang tahimik na pag-upgrade, patakbuhin ang sumusunod na command: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

Pag-upgrade sa default na folder

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Mag-browse sa folder kung saan na-extract mo ang Dell Command | I-configure ang installer mula sa Dell Update Package (DUP).
2. Patakbuhin ang sumusunod na command: msiexec.exe /i Command_Configure.msi /qn
   Ang Dell Command | Ang mga bahagi ng pag-configure ay tahimik na naka-install sa mga sumusunod na lokasyon:
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

Mga Paksa:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

Talahanayan 4. Mga sinusuportahang operating system

Supported Platforms for Linux

Table 5. Supported platforms

TANDAAN: Platforms must support WMI-ACPI BIOS for full functionality.

TANDAAN: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

TANDAAN:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. TANDAAN:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
Ang default na landas sa pag-install ay /opt/dell/dcc.

Mga kinakailangan

• Ang workstation ay dapat na tumatakbo sa isang sinusuportahang operating system ng Linux.
• Mag-download ng mga openSSL 1.x na library para i-install at patakbuhin ang Dell Command | I-configure sa Red Hat Enterprise Linux 8 at Ubuntu Desktop 20.04.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. Mula sa dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Untar ang file gamit ang sumusunod na command:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Untar ang file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   Bersyon>_ Ang .tar.gz ay naglalaman ng mga sumusunod na pakete na dapat i-install sa sumusunod na pagkakasunud-sunod:
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   TANDAAN: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f install
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   Ang default na landas sa pag-install ay /opt/dell/dcc.
   TANDAAN: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f install

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

TANDAAN: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

Upang i-uninstall ang Dell Command | I-configure sa mga system na tumatakbo sa Red Hat Enterprise Linux 8 o 9, patakbuhin ang mga command sa sumusunod na pagkakasunud-sunod:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

TANDAAN: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. Upang i-uninstall ang Dell Command | I-configure at alisin ang configuration files at pansamantala files, run the following command: dpkg –purge command-configure
2. Upang i-uninstall ang Hapi at alisin ang configuration files at pansamantala files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. I-upgrade ang bersyon ng Dell Command | I-configure sa system.

TANDAAN: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files at mga folder sa system. Ang files at mga folder ay walang anumang functional na epekto.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Untar ang file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh –nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Untar ang file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. Upang mag-upgrade, patakbuhin ang sumusunod na command:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. Upang i-verify ang kasalukuyang Dell Command | I-configure ang bersyon, pumunta sa default na landas sa pag-install at patakbuhin ang:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

Ang kabanatang ito ay nagbibigay ng taposview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

Mga Paksa:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

TANDAAN: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

Mga kinakailangan

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server mga payload.

Tiyakin na ang mga sumusunod na kinakailangan ay natutugunan:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   Ang installation wizard ay ipinapakita.
2. Select the Dell Command Secure Bios Configuration Server option.
3. I-click ang Susunod.
4. I-click ang I-install upang simulan ang pag-install.
   The installation completion wizard is displayed.
5. I-click ang Tapusin upang makumpleto ang pag-install.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   TANDAAN: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file sa URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   TANDAAN: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file kasama ang mga sumusunod:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   “Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   TANDAAN: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   TANDAAN: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

TANDAAN: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Paglikha ng bootable image preinstallation environment gamit ang Windows PE 10.0 at 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. Mula sa Microsoft website, i-download at i-install ang Windows ADK sa client system.
   TANDAAN: Habang nag-i-install piliin lamang Mga Tool sa Pag-deploy at mga bintana Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. I-install ang Dell Command | I-configure.
4. Isama ang Dell Command | I-configure ang istraktura ng direktoryo sa isang ISO file upang lumikha ng isang bootable na imahe ng ISO.

Pagsasama ng Dell Command | I-configure ang istraktura ng direktoryo sa isang ISO file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. I-install ang Windows 11 operating system.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86_64.
2. Buksan ang command prompt na may mga pribilehiyo ng administrator.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   TANDAAN: Tiyakin na ang path na ginagamit sa command ay ang sa Dell Command | I-configure ang folder.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

Mga mapagkukunan at suporta

Maa-access mo ang mga kinakailangang dokumento sa pamamagitan ng pagpili sa iyong produkto.

1. Pumunta sa Suporta | Dell.
2. I-click I-browse ang lahat ng produkto.
3. I-click Software & Solutions.
4. I-click Pamamahala ng Sistema ng Kliyente.
5. I-click Dell Command | Configure.
6. I-click Select This Product.
7. Upang view ang mga kinakailangang dokumento, i-click ang kinakailangang pangalan ng produkto at numero ng bersyon.

TANDAAN: Kung wala kang aktibong koneksyon sa Internet, mahahanap mo ang impormasyon sa pakikipag-ugnayan tungkol sa iyong invoice ng pagbili, packing slip, bill, o katalogo ng produkto ng Dell.

Nagbibigay ang Dell ng ilang online at nakabatay sa telepono na suporta at mga opsyon sa serbisyo. Nag-iiba-iba ang availability ayon sa bansa o rehiyon at produkto, at maaaring hindi available ang ilang serbisyo sa iyong lugar. Upang makipag-ugnayan sa Dell para sa mga isyu sa pagbebenta, teknikal na suporta, o serbisyo sa customer:

1. Pumunta sa Suporta | Dell.
2. Piliin ang iyong kategorya ng suporta.
3. I-verify ang iyong bansa o rehiyon sa Pumili ng Bansa / Rehiyon drop-down na listahan sa ilalim ng pahina.
4. Piliin ang naaangkop na link ng serbisyo o suporta batay sa iyong pangangailangan.

Mga Dokumento / Mga Mapagkukunan

DELL Command Configure Software [pdf] User Manual Command Configure Software, Configure Software, Software

Mga sanggunian

• User Manual