1. Panimula
This manual provides instructions for the Mini BFT Mitto Series 433.92Mhz Garage Door Remote Control. This wireless handheld rolling code transmitter offers stable and reliable control for various automation systems, including garage doors, gates, and other access control systems. Its compact design and wall-mounted installation options provide convenient control for residential, commercial, and industrial applications.
Figure 1: BFT 433MHz remote controls (2-button and 4-button models). Key features highlighted: Security 2.0, Remote Dominance, Control One Garage Door, Lightweight.
2. Mga Pangunahing Tampok
- 433MHz Strong Signal: Ensures stable penetration through walls and obstacles for reliable operation.
- 12V DC Powered: Low power consumption design for long-lasting and dependable performance.
- Wall-Mounted Design: Offers flexible installation options for convenience.
- Multi-Device Compatibility: Compatible with a variety of receiving systems.
- Solid na Konstruksyon: Built with durable materials for extended lifespan.
- Madaling Pagpares: Simple and quick process to pair with compatible devices.
3. Pagkakatugma
The BFT Mitto Series remote control is compatible with the following BFT brand garage door and roller blind door remote control models:
- Mitto 2 / Mitto 4
- Mitto B RCB 02 / Mitto B RCB 04
- Kleio B RCA 02 / Kleio B RCA 04
- TRC1 / TRC2 / TRC4
- Mitto2M / Mitto4M
Figure 2: Compatibility diagram showing the BFT remote control with various compatible BFT remote models.
4. Pag-setup at Pagprograma
Follow these instructions carefully to program your new remote control with your receiver system. There are two common programming types:
Figure 3: Programming instructions for Type 1 (physical buttons) and Type 2 (digital display) receivers.
Type 1 Programming (Physical Buttons)
- Buksan ang casing of your receiver. It is located next to your motor.
- On the receiver circuit board, press the programming button (SW1). The LED light of the receiver blinks. Let the button go.
- Press both buttons on your new remote control at the same time. Let them go. The LED light of the receiver remains lit fixedly.
- Press the left button on your new remote control. Let it go. The LED light of the receiver blinks.
- Wait 5 seconds. The LED light of the receiver turns off.
- Repeat this procedure for the right button of your new remote control. This time, use the programming button SW2.
- Maghintay ng 10 segundo.
- Your new remote control is programmed.
Type 2 Programming (Digital Display)
- Press the "OK" button on your receiver twice. The screen displays "PARA."
- Press the "-" button on your receiver twice. The screen displays "RADIO."
- Press the "OK" button on your receiver once. The screen displays "ADJ STRT."
- Press the "OK" button on your receiver once. The screen displays "Hidden Button."
- Press both buttons on your new remote control at the same time. Keep them pressed down. The screen displays "Released".
- Let the buttons go. The screen displays "Desired Button".
- Press a button on your new remote control. The screen displays "OK".
- Maghintay ng 10 segundo.
- Your new remote control is programmed.
Video 1: Demonstration of the remote control programming process with a receiver board.
5. Mga Tagubilin sa Pagpapatakbo
Once programmed, your BFT Mitto remote control is ready for use. Simply press the corresponding button on the remote to activate the linked function (e.g., open/close garage door, gate, etc.). Ensure you are within the transmission range for optimal performance.
6. Pagpapanatili
- Pagpapalit ng Baterya: The remote control uses a 12V battery. If the remote's indicator light becomes dim or its range decreases, it's time to replace the battery. Open the remote's casing carefully to access and replace the battery, ensuring correct polarity.
- Paglilinis: Punasan ang remote control gamit ang malambot at tuyong tela. Iwasan ang paggamit ng malupit na kemikal o mga panlinis na may abrasive.
- Imbakan: Itabi ang remote sa isang tuyong lugar, malayo sa matinding temperatura at direktang sikat ng araw.
7. Pag-aayos ng solusyon
- Remote hindi tumutugon:
- Suriin ang baterya. Palitan kung kinakailangan.
- Ensure you are within the effective transmission range.
- Verify that the remote is correctly programmed to the receiver. If unsure, repeat the programming steps.
- Pinababang saklaw:
- Palitan ang baterya.
- Check for any new obstructions between the remote and the receiver.
- Ensure there is no interference from other 433MHz devices.
8. Mga pagtutukoy
| Tampok | Pagtutukoy |
|---|---|
| Dalas ng Paggawa | 433MHz |
| Nagtatrabaho Voltage | DC 12V |
| Distansya ng Transmisyon | Up to 100m (open environment) |
| Paraan ng Pag-install | Disenyo ng naka-mount na pader |
| Uri ng Baterya | 12V battery (commonly used) |
| Paraan ng Pag-encode | Rolling code |
| Mga Dimensyon (P x L x T) | 64mm (2.52in) x 40mm (1.57in) x 16mm (0.63in) |
Figure 4: Dimensions of the BFT remote control.
9. Mga Sitwasyon ng Paglalapat
The BFT Mitto Series remote control is versatile and can be used in various applications:
- Smart Home Systems
- Access Control Barrier Gates
- Mga Sistema ng Pagkontrol sa Pag-iilaw
- Industrial Equipment Control
- Mga Sistema ng Seguridad
- Pagkontrol sa Pinto ng garahe
- Makinarya sa Agrikultura
- Main Gates, Fences, Sliding Doors, Railings
Figure 5: Common applications for the remote control.
Figure 6: Additional application examples for the remote control.
10. Mga Nilalaman ng Package
Kasama sa package ang:
- 1 x Wireless Remote Control
Larawan 7: Halample of the 4-key remote control with keychain.
11. Mga Tip sa Gumagamit
Walang mga partikular na tip sa user na available mula sa reviews o Q&A para sa produktong ito.
12. Warranty at Suporta
For any questions, technical support, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.
