1. Panimula
The AUTOOL DM303 is a versatile hand-held automotive diagnostic multimeter that integrates the functions of a digital oscilloscope and a digital multimeter. Designed with embedded digital control technology, it provides comprehensive diagnostic capabilities for various automotive electrical systems. This device is ideal for professional technicians and automotive enthusiasts for accurate and efficient vehicle maintenance and troubleshooting.
2. Mga Pangunahing Tampok
The AUTOOL DM303 offers a wide range of diagnostic functions:
- DC/AC Voltage Pagsukat
- DC/AC Kasalukuyang Pagsukat
- Pagsusulit sa Paglaban
- Pagsukat ng Dalas
- Pagsubok sa Oscilloscope
- Automotive Circuit Test
- Car Start-up Test
- Pagsubok sa Injector
- Automobile Relay Test
- Analog Signal Test
- Ignition Pulse Signal Test
- K/CAN Line Data Analysis
The device features a 2.8-inch color LCD screen with a resolution of 320*240, offering adjustable brightness for clear and intuitive data display in various working environments.
It supports 13 languages: Deutsch, Spanish, French, Italian, English, Japanese, Portuguese, Dutch, Polish, Russian, Korean, Chinese, and Traditional Chinese.
3. Mga Nilalaman ng Package
The AUTOOL DM303 comes with the following items, neatly stored in a portable toolbox:
- AUTOOL DM303 Main Unit
- Multi-functional Detection Line (C01-1 to C01-SIN, C01-S1, C01-S2)
- Battery Clip Line (C02)
- Ignition Pulse Signal Detection Line (C03)
- Probe Terminal (C04-2)
- Jumper (Black) (C05)
- Jumper (Green) (C06)
- Jumper (Yellow) (C07)
- User Manual
- Portable Toolbox
4. Over Productview
The DM303 is designed for ease of use and durability. Below is an overview ng mga pangunahing bahagi nito:
- Display screen: 2.8-inch color LCD.
- Power indicator: Isinasaad ang status ng power ng device.
- Power key: Turns the device ON/OFF.
- Hold key: Freezes the current reading on the screen.
- Susi ng direksyon: Used for navigation within menus.
- Susi sa pagbabalik: Navigates back to the previous menu or screen.
- Ipasok ang key: Confirms selection or enters a menu.
- 10A current input: Input jack for high current measurements.
- mA/uA measurement input: Input jack for low current measurements.
- Susi sa pag-iilaw: Activates the device's built-in light.
- ZERO / F1 Function key: Zeroes readings or acts as Function 1.
- F2 Function key: Acts as Function 2.
- Measurement mode switching: Button to cycle through different measurement modes.
- Diode, voltage, resistance, frequency measurement input: Common input jack for these functions.
- COM measurement input: Common ground input jack.
- Interface ng DB15: Connector for specialized diagnostic cables.
- SD card slot / data interface: For software updates and data storage.
- Ilaw: Built-in light for illuminating work areas.
- back bracket: Allows the device to stand upright for hands-free operation.
5. Mga pagtutukoy
| Katangian | Halaga |
|---|---|
| Pangalan ng Modelo | DM303 |
| Pangalan ng Brand | Autory |
| Pinagmulan | Mainland China |
| Sertipikasyon | CE |
| Panlabas na Sertipikasyon sa Pagsubok | ce |
| Kulay ng Screen | 2.8 pulgadang LCD |
| Resolusyon | 320*240 |
| Voltage Saklaw ng Pagsukat | DC 0-1000V, AC 0-700V |
| Kasalukuyang Saklaw ng Pagsukat | 0-20A, 0-200mA |
| Saklaw ng Pagsukat ng Paglaban | 0-1MΩ |
| Saklaw ng Pagsukat ng Dalas | 1Hz-1MHz |
| Automotive Circuit Drive Current | 0-5A |
| Injector Drive Signal Output | 500-6000rpm |
| Temperatura sa Paggawa | 0~40°C (32~104°F) Humidity: ≤75% |
| Temperatura ng Imbakan | 10~50°C (14~122°F) Humidity: ≤70% |
| Altitude | 2000m |
| Haba ng Item | 26cm |
| Lapad ng Item | 20cm |
| Taas ng item | 11cm |
| Timbang ng Item | 1.7kg |
| Input Impedance (Voltage) | 2~3MΩ (<160V); 10MΩ (>160V) |
| Max Input Voltage | 1000Vpp |
| Analog Bandwidth | 500KHz |
| 10A Terminal Fuse | 15A self-recovery fuse (Max 20A) |
| mA/uA Terminal Fuse | 0.5A self-recovery fuse (Max 200mA) |
6. Gabay sa Pag-setup
6.1 Pag-install ng Baterya
The AUTOOL DM303 is not equipped with batteries for logistics and transportation reasons. You will need to purchase 4pcs 1.5A batteries (AA size) or a 3.7V, 1200 mAh lithium battery separately.
- Hanapin ang kompartimento ng baterya sa likod ng device.
- Buksan ang takip ng kompartamento ng baterya.
- Insert 4pcs 1.5A batteries, ensuring correct polarity (+/-).
- Isara nang maayos ang takip ng kompartamento ng baterya.
Tandaan: Without batteries, the device will turn off automatically when disconnected from the charging cable.
6.2 Pag-on/I-off ang Power
Pindutin nang matagal ang Power key (labeled '3' in the Product Overview diagram) to turn the device ON or OFF.
7. Mga Tagubilin sa Pagpapatakbo
The AUTOOL DM303 features an intuitive interface for selecting and performing various tests. Use the Mga susi sa direksyon (5) to navigate through menus and the Ipasok ang susi (7) to confirm selections.
7.1 Pangkalahatang Pag-navigate
- Gamitin ang Mga susi sa direksyon (Up, Down, Left, Right) to move the cursor or change values.
- Pindutin OK (Enter key) to select an option or confirm an action.
- Pindutin ESC (Return key) to go back to the previous screen or cancel an operation.
- Gamitin F1 (ZERO) at F2 for specific function adjustments as indicated on the screen.
- Ang HAWAKAN key (4) can be used to freeze the current measurement on the display.
7.2 Mode ng Multimeter
Select 'Multimeter' from the main menu. This mode allows you to measure AC/DC voltage, current, resistance, diode forward voltage drop, on-off continuity, and frequency. Connect the appropriate probes to the device's input jacks (8, 9, 14, 15) and to the circuit under test.
7.3 Mode ng Osiloskoup
Select 'Oscilloscope' from the main menu. This mode provides a complete intelligent measurement system for signal input, data sampling, processing, and automatic search. It has a waveform test bandwidth of 500KHz and a variable sampling frequency for measuring slowly varying signals. It is suitable for observing various automotive signals such as engine ignition pulse, camshaft, crankshaft, wheel speed sensor, and oxygen sensor signals.
7.4 Automotive Circuit Test
This function allows online testing of low voltage circuits, detection of high voltage or line leakage, and output of power supply voltage. It can also output power voltage to test car components or lower voltage to drive components like lights. It can test battery voltage during vehicle startup to assess the starting system and battery condition.
7.5 Car Start-up Test (Cranking Test)
Connect the device to the vehicle's battery using the appropriate cables. Select 'Cranking Test' from the menu. The device will monitor current and minimum voltage during engine cranking to evaluate the battery and starter motor performance.
7.6 Pagsubok sa Injector
Connect the injector to the device using the specialized terminals (C01-2). Select 'Injector Test' to simulate engine speed and drive the fuel injection nozzle, allowing for functional testing of the injector.
7.7 Automobile Relay Test
Connect the relay to the device using the specialized terminals (C01-2). Select 'Relay Test' to check the output status and contact resistance of the relay.
7.8 Analog Signal Test
This function is used for car ECU detection. It can simulate square wave and sine wave outputs, which can be used to test ECU inputs or drive certain components.
7.9 Ignition Pulse Signal Test
Use the Ignition Pulse Signal Detection Line (C03) to connect to the ignition system. Select 'Ignition Pulse Signal Test' to analyze the ignition pulse waveform and characteristics.
7.10 K/CAN Line Data Analysis
Connect the device to the vehicle's K-line or CAN bus using the appropriate cables (C01-K, C01-CAN+, C01-CAN-). Select 'K/CAN Line Data' to monitor and analyze data signals on these communication lines.
7.11 Pagsukat ng Dalas
Select 'Frequency Measurement' from the multimeter mode or a dedicated frequency function. Connect the probes to the signal source to measure its frequency.
8. Pagpapanatili
8.1 Pag-upgrade ng Software
The instrument supports software updates via an SD card. To update the software:
- Download the latest application software file from the official AUTOOL website.
- Kopyahin ang na-download file sa isang SD card.
- Insert the SD card into the device's SD card slot (17).
- Sundin ang mga tagubilin sa screen upang makumpleto ang pag-update ng software.
8.2 Paglilinis at Imbakan
- Panatilihing malinis at tuyo ang device. Gumamit ng malambot, damp tela para punasan ang panlabas. Huwag gumamit ng mga nakasasakit na panlinis o solvents.
- Ensure all ports and connectors are free from dust and debris.
- When not in use, store the main unit and all accessories in the provided portable toolbox. The toolbox is designed to protect the instrument from falls and impacts.
9. Pag-aayos ng solusyon
- Hindi naka-on ang device: Check if batteries are correctly installed and charged. Ensure the power key is pressed and held sufficiently.
- Mga hindi tumpak na pagbabasa: Verify that all connections are secure and probes are properly attached to the circuit. Ensure the correct measurement mode is selected.
- Screen is dim or unreadable: Adjust the screen brightness through the device settings.
- Nagfi-freeze o hindi tumutugon ang device: Try restarting the device by holding the power key. If the issue persists, ensure the software is up to date.
10. Mga Tip sa Gumagamit
- Always ensure the device is powered off before connecting or disconnecting probes to prevent accidental short circuits or damage.
- For precise current measurements, especially low currents, ensure the circuit is properly isolated and the correct input jack (10A or mA/uA) is used.
- When using the oscilloscope function, familiarize yourself with typical waveforms for the components you are testing to quickly identify anomalies.
- Utilize the back bracket (19) for hands-free operation, especially when working in tight engine compartments.
11. Warranty at Suporta
The AUTOOL DM303 comes with a 3-year warranty, ensuring quality assurance. For technical support, service, or warranty claims, please contact your authorized AUTOOL dealer or visit the official AUTOOL website para sa impormasyon ng contact.
