Gumagamit ng iWFCam App

Pahayag ng Fcc

Babala:

Sumusunod ang device na ito sa bahagi 15 ng Mga Panuntunan ng FCC. Ang operasyon ay napapailalim sa sumusunod na dalawang kundisyon:

1. ang device na ito ay maaaring hindi magdulot ng mapaminsalang interference, at.
2. dapat tanggapin ng device na ito ang anumang interference na natanggap, kabilang ang interference na maaaring magdulot ng hindi gustong operasyon.

Ang anumang mga pagbabago o pagbabago na hindi hayagang inaprubahan ng partido na responsable para sa pagsunod ay maaaring magpawalang-bisa sa awtoridad ng gumagamit na patakbuhin ang kagamitan.

Tandaan: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• I-reorient o i-relocate ang receiving antenna
• Palakihin ang paghihiwalay sa pagitan ng kagamitan at receiver.
• Ikonekta ang kagamitan sa isang saksakan sa isang circuit na iba sa kung saan nakakonekta ang receiver.
• Consult the dealer or an experienced radio/TV technician fo help

Mahalaga: Ang mga pagbabago o pagbabago na hindi hayagang inaprubahan ng tagagawa na responsable para sa pagsunod ay maaaring magpawalang-bisa sa awtoridad ng gumagamit na patakbuhin ang kagamitan.

Paglalarawan ng Produkto

I-ON/I-OFF: Turn the toggle switch to “ON”(or Long-press the power button) to turn on;
Turn the toggle switch to “OFF”(or long-press the power button) to turn off;
‘Reset’camera: Press and hold the “R”(or “M”)key until the indicator light goes off,and the camera will auto reset and reboot;

Puwang ng TF card: magpasok ng memory card (Micro SD card) upang i-save ang pag-record files;

Kung walang baterya ang binili mong camera:
Mangyaring panatilihin ang plug sa isang DC=5V/1A USB power supply upang ma-power ang camera;

Kung ang camera na binili mo ay may built-in na baterya:

Please plug in a DC=5V/1A USB power supply to charge the camera. The orange indicator light stays on during charging, goes off after fully charged. If no orange indicator light is visible. Please turn on the camera for charging. Indicator light display description:

1. Point-to-point(AP) mode: Indicator light flashes slowly;
2. Remote(IP) mode: Indicator light is always on;
3. The remote mode is not connected to the network: Indicator flashes quickly.

Maaaring i-on/i-off ang mga indicator sa APP.

Install The App “iWFCam”

To use the Camera, you will need to download the “iWFCam” app.
Ang app ay idinisenyo lamang upang magamit sa isang mobile o tablet sa parehong Android at iOS;
Available ito nang libre sa parehong Apple App Store at Google Play Store. Walang buwanan o mga bayarin sa subscription sa serbisyo na nauugnay sa app;
You can install the application for free from the following QR Code, or search for it in the Apple App Store or Google Play Store using this name “iWFCam”;
Ang aming app ay ganap na libre para sa panghabambuhay na paggamit at hindi namin kailanman hihilingin sa aming mga customer ang anumang karagdagang bayad.

I-SCAN MO AKO

Mangyaring i-scan ang QR code sa ibaba upang panoorin ang proseso ng koneksyon

Scan me to watch videos

Connecting Process (Ap Mode)

Narito ang isang video na nagpapakita ng proseso ng pagkonekta ng AP MODE (Paki-scan ang QR code sa ibaba)

Hakbang 1: I-on ang iyong camera.
Hakbang 2: In your phone “settings”, go to “WLAN” settings and connect to the camera’s WiFi signal (WiFi’s name BG***/BH***/BK***), connect it even if it says “No Internet Connection”.This means that you need to switch the WiFi connected to your phone to the WiFi signal of your camera. If you cannot find the WiFi signal for the camera in your phone’s “WLAN” settings, please reset the camera (Turn ON the camera and Press and hold the “R”(or “M”) key until the indicator light goes off).

Refer To The Following Pictures

Hakbang 3: Once your phone is connected to the camera’s WiFi signal, open the”iWF Cam” app, The camera will auto be added to the app and show “online”. At this point, you will be able to view real-time na video ng camera at kontrolin ang mga setting nito.

MAHALAGA:

a, Make sure your phone within a range of 35 feet (10 meters) from the camera and stays connected to the camera’s WiFi signal “BG***/BH***/BK***” ,even if it says “No Internet Connection”.
b, Tiyaking ibibigay mo sa app ang lahat ng kinakailangang pahintulot (Napakahalaga)

Set Up Camera Connection To The Internet For Remote View(Ip Mode)

Here is a video that demonstrates the IP MODE connecting process (Please scan the QR code below)

In AP mode with camera online(please refer to the AP MODE connecting process).
Click on the “Settings” icon in the bottom right corner and select “Device Settings”,go to “WiFi Config”,select your own router’s WiFi name and enter the correct password, click “OK”,then wait for the camera auto reboot, once it shows “online”, This means that you have successfully completed the camera networking settings, You will be able to watch real-time views and control cameras any time, any where. Refer to the following pictures:

If the camera you purchased comes with the “sleep” function, After the camera is successfully connected to the network, it will automatically activate the sleep function when idle.Sleep mode can be turned on/off in the app.After turning off sleep mode, it has all the functions of a regular WiFi camera.

Tandaan: The external network that you connected the camera to (phone hotspot/router’s WiFi) needs to be within 35ft (10m) from the camera.

Only 2.4G’s WiFi is supported.And ensure that no special symbols appear in the wifi name and password, as special symbols may not be read.

Set A Password For The Camera

Maaari kang magdagdag ng password para sa camera sa app. Ang default na password para sa camera ay 8888. Kung nakalimutan mo ang password pagkatapos itong baguhin, mangyaring i-reset ang camera at babalik ang camera sa default na password na 8888.

Regarding Camera’s “Motion Detection Alarm”Function (If Needed)

If the camera you purchased comes with the “sleep” function, you need to turn off the “sleep” mode to use “Motion detection alarm”function;

Once sleep is turned off, low-power performance can’t be achieved;

If the camera you purchased comes with a PIR, it can receive human body sensing alarms without turning off sleep.

Pag-troubleshoot

1. If changing the network environment for use, please reset the camera first and then reconfigure WiFi;
2. Kung hindi nakilala ng camera ang memory card, mangyaring palitan ang memory card o i-format ito bago gamitin;
3. Kung ang camera na binili mo ay may "sleep" function, Ang sleep mode ay magkakabisa lamang kapag ang camera ay nakakonekta sa network, at ang AP mode ay hindi matutulog. Maaaring i-on/i-off ang sleep mode sa app.
4. Ang camera ay bubuo ng isang tiyak na halaga ng init sa panahon ng operasyon, ngunit hindi ito nakakaapekto sa pagganap at maaaring gamitin nang may kumpiyansa;
5. Kung may ipinapakitang error sa password sa pag-access: Mangyaring i-reset ang camera upang maibalik sa default na password 8888;

Mga Dokumento / Mga Mapagkukunan

iWFCam iWFCam App [pdf] User Manual iWFCam App, iWFCam, App

Mga sanggunian

• User Manual